Standard design Possible adaptation
Manufacturing standards IEC 60076-11, EN 50588, EN 50629 GOST-R, BS, IEEE
Efficiency (losses level) Eco-Design Every reduced losses required by customers
Class tests C3*, E3, F1, ≤ 5 pC
HV/LV coils HV encapsulated in cast resin/LV impregnated HV and LV encapsulated in cast resin
Installations Indoor use:
• IP00 (without enclosure)/IP31 (with enclosure)
• C2 Corrosivity class, Medium durability (in
compliance with ISO 12944-6)
Outdoor use with properly designed enclosure:
• From IP35 up to IP44 (with enclosure)
• Up to C5-Marine, Medium durability
(in compliance with ISO 12944-6)
Winding material According to manufacturer optimization (Cu or Al) Cu/Cu
Phases Three-phase Single-phase
Cooling system Standard:
• AN (natural air)
Option:
• AF (air forced)
• 40% performance reserves
AFWF (air forced water forced)
Maximum T°C/altitude 40°C at any time/1000 m Up to 65°C/Above 1000 m
Thermal class insulation According to IEC 60085, Class F
Temperature rise 100 K 80 K (for 40°C)
Temperature rise adapted to maximum T°C
Temperature Rise < 100K upon request
Rated frequency 50 Hz or 60 Hz
Rated power Up to 3150 kVA Up to 15 MVA
Impedance voltage Uk From 4 to 6% • Lower than 4%
• Higher than 6% – Up to 11%
Vector groups Dyn, YNd All others according to IEC
Rated HV insulation Up to 36 kV (IEC) Up to 40.5 kV (GOST-R)
HV tapping Off-circuit tapping links: 3 or 5 positions, +/- 2.5% Off-circuit tapping links:
up to 9 positions, +/- 2.5% or higher
On Load Tap Changing (OLTC)
HV terminals Standard HV connections HV/MV plug-in or porcelain bushings through dedicated
cable boxes (IEC, BS or NEMA compliant)
Rated LV (MV) insulation 1.1 kV Up to 7.2 kV
LV terminals • Standard LV connections
• Top or bottom entry (on request)
• LV cable ducting interface (Canalis)
• Side entry through dedicated cable boxes
(IEC, BS or NEMA compliant)
Thermal protection • AN cooling system:
6 PTC sensors (or 3 PT100) + Thermal Relay
• AF cooling system:
6 PT100 sensors (or 9 PTC) + Thermal Relay
Máy biến áp khô Schneider
Điện áp đến 36kV, công suất đến 15MVA, máy biến áp khô Schneider là một giải pháp an toàn và thân thiện với môi trường, đáp ứng mọi yêu cầu của khách hàng trong mọi lĩnh vực với những tiêu chuẩn khắt khe nhất
Danh mục: Sản phẩn trung thế, Tất cả sản phẩm
Đánh giá
Chưa có đánh giá nào.